Hello Community......

I plan on using an SQ6 on an "odd" engine setup.

From my understanding if you don't use a Cam sensor the ECU will either have a wasted spark and fuel every 360deg however if you use a cam position sensor then it will sync and only fuel and spark on the correct stroke.

Here is my conundrum....I want to use the Cam phaser to control an intake vane on a two stroke engine, so I will have a cam postion sensor.  My concern is then Ill miss every other power stroke because the ECU will think its a four stroke.  My solution would be to insure I have a cam trigger every 360 deg of the crank rotation.  Will this work?

Thanks Again!
Quote 0 0
Put the Cam sensor on Dig input 1 and then simply use it for cam position.

Quote 0 0