Daniel
Hello

Sorry for my english

I am a German Teammember of Porsche Team. I have a problem with creating a Track Map.

I tried a track Map create via google earth according userguide. Start- Finishline is (one) point.

Convert the kmz file via TrackMAp Generator in a GPX File. 

Put it on the USB Stick with the Name map.gpx in the root.


but the track is not show on video. And no Laptime.


In the Video from the car in the toolbox show me that the GPS are work.

Please. I need help for create the Nurburgring Nordschleife Track.

Thank you for your help.

Regards Daniel
Quote 0 0
RvMorrow1
Hi Daniel,

Could you please send me your .kmz file of the track. I will have a look at it to confirm everthing is alright.

Also, could you confirm if the GPS points iare appearing in Pi Toolbox?

Kind Regards,
Rob  

Robert Morrow
Applications Engineer
Motorsport

Tel: +44 1954 253628  |  Email: robert.morrow@cosworth.com
Cosworth Electronics, Brookfield Technology Centre, Twentypence Road, Cottenham, Cambridge, CB24 8PS, England

Quote 0 0
RvMorrow1
Hi Daniel,

Thank you for those details.

One thing to make sure is that the USB is connected to the car before the car is powered up.
this is because the system only looks for the GPX file on startup. if there is no file found it will not look again until the next power cycle.
 

Thanks,  
Robert

Robert Morrow
Applications Engineer
Motorsport

Tel: +44 1954 253628  |  Email: robert.morrow@cosworth.com
Cosworth Electronics, Brookfield Technology Centre, Twentypence Road, Cottenham, Cambridge, CB24 8PS, England

Quote 0 0
Daniel
Hallo Robert

Thank you for your answer.

We make it as follow.

1. TrackMap to USB STick. Carnum file too. (Carnum file show in Video)
2 Connect USB STICK in Car
3. Switch on the Main Powerswitch
4. Wait a minute
5. Switch on ignition
6. Wait a minute
7. Start engine

8.Drive Training or eingine run more than few minutes

9. Switch off all power
10. disconnect USB Stick.

11. Connect to PC and we see no TrackMap.  :-(

Regards Daniel
Quote 0 0