poor-sha
I have a time/distance chart that shows all 4 suspension displacements tiled on a display.  How can I reorder the items in the display?  It currently forces them alphabetically so I see both wheels on top and then both right wheels. I want the two front wheels on top and the two rear tires below.  
Quote 0 0
littleozfella
Hi,
     Alt-3 will take you to channel properties. If you click on say your right front damper, then in the bottom of the Channel properties column you will see where you can change the colors etc.. In this area there is a Y Axis Enabled..  Select this to YES.     Do for all 4 channels

Click on your Time/distance chart and press T to tile the Channels. Now they will all be overlaid. Click on say the Front Right values box on the right side of the screen and you will see the Y axis values on the left side. You can now click on the top of bottom corner or middle and drag the channel to wherever you wish.  BUT the values box will always be in alphabetical order.

  It is better to get used to using F1 key for help, there is very comprehensive help in Toolbox.   This topic search Scaling an Individual Trace..
    It will take some time but search through help and you will find you will get a lot more from Toolbox..

 cheers
Quote 0 0
poor-sha
Thank you.  I am familiar with the online help but couldn't find these instructions.  Unfortunately I can't seem to find a place on the Y-axis that gives me the ability to resize or move.  
Quote 0 0
littleozfella
Hi, Sorry delay been traveling..
        NOT online help... F1 key.. Click on the TAB "Search" and type in Scaling an Individual Trace and click on List Topics, the first topic will be what you need.

Or follow my instructions in the last answer.  

   Note after you enable the Y axis in Channel Properties y.png    you then must have your worksheet in Overlay mode NOT Tile mode. You can toggle the modes by using the "T" Key.  When in Overlay mode you can then drag the Y axis to where you like by moving the mouse cursor to the point on the y axis. Bottom will let you drag down, top up, middle to move all to a different position. 

y2.jpg 

Cheers

Quote 0 0
poor-sha
Thank you for taking the time to explain this a second time with screen shots.  I definitely did miss some steps and have it now.  So in effect, I'm not reordering charts in tile mode as much as I am resizing each chart in overlap mode and them moving that around the graph.  I would not have expected that to be possible but I can work with that.  

If you have any suggestions on my PDR GPS Map question in the other thread I'd greatly appreciate your insight.  I've not found anything that applies specifically to PDR data files in the F1 help and the lack of a good map is my biggest blocker at this time.  You seem to be the only person still responding to questions on this forum so again thank you.
Quote 0 0