Perfect Motorsport Show full post »
Perfect Motorsport
Denrmer wrote:
IMG_20180806_204826.jpg hello i have conexion with the ECU now a pectel sq6 turbo. where get i the metafile for that??

Best Regards Dennis Rømer


I don't know and i hope Pectel engineer guide us.
Quote 0 0
Perfect Motorsport
Jake_Hardy wrote:
Hi,

First step I would try to ping the device using command prompt. In the command window type the following - Ping -t 172.16.64.2. If you get a response then move onto the next step, if you do not get a response then this is an issue with your ethernet connection to the device. 

If you can ping the device, then the issue you are having may relate to your windows firewall blocking connectivity with the device through CalTool. In the windows control panel navigate to the 'allowed apps' (Control Panel\System and Security\Windows Defender Firewall\Allowed apps) and allow CalTool the full access.

Ensure you have the correct personality file installed on your PC (http://support.cosworth.com/post/latest-software-release-announcements-and-downloads-for-pi-caltool-9610496?pid=1302790514). This acts as a license file. 

If you are getting a connection to the device, but you are missing a metafile then Caltool will report this. If you can connect to a device, it should appear in the bottom right hand corner of the CalTool window, along with the current firmware version of the device. If you can see this, then please let me know the ECU firmware version and device type (SQ6 TURBO,SQ6M NA etc) and I will supply you with the relevant metafile. 

Please try the suggestions above and let me know if you are still having issues.  

Kind regards,


Now we need the Metafile please advise me.
Quote 0 0
Perfect Motorsport
Denrmer wrote:

 hello i have conexion with the ECU now a pectel sq6 turbo. where get i the metafile for that??

Best Regards Dennis Rømer
.

I don't know and i'm waiting for Cosworth engineer. 
Quote 0 0
Denrmer
Hello. some one some can help me i have a old pectel sq6 and i need the descprow programs for it??
Quote 0 0
littleozfella
Please check your emails.. I have sent you many emails...   if not check your junk folders or send me another email that is stable please...
  
Quote 0 0
littleozfella
OK there seems to be 2 completely different conversations going on here...   PLEASE make a new topic to each person.. I don't know who I am helping....  Please be specific...

cheers...
Quote 0 0
CosworthSupport
Hi Both,

SQ6 3-36 NA is compatible with Caltool, metafile in the attached zip file.

SQ6 2-92 Turbo is not compatible with Caltool. Therefore you will either need to use the old obsolete DescProW software, or upgrade to a newer code version.

Many thanks,
Cosworth Support
Cosworth Electronics
Quote 0 0
littleozfella
This topic has been solved for both parties..
Quote 0 0
Perfect Motorsport
This topic has been solved for both parties..


Thank you very much my friend for helping. I'm satisfied of this forum.
Quote 0 0