ce_dois
hello

i have a car here at my shop for tuning and some updates

the car has a pectel sq6 as stated in the topic

its my frist time with this ecu, i installed the lasted pi call tool software and the 2017 personality.

i set up the lan connection, but after i opel caltool it gives me this error:

Error [11:45:07] Your personality does not allow you to calibrate this device

any help will be apreciated, i have the car on the dyno and i cant connect...

regards

Quote 0 0
JBracken
Hi ce_dois,

The message you are seeing indicates that the ECU has a developer associated with it. Please see my explanation of what this means in the thread below. If you can provide some extra information about the ECU I may be able to give you some feedback.

http://support.cosworth.com/post/used-sq6-8188082?highlight=developer&pid=1292942523

Thanks and kind regards,

James
James Bracken BEng (Hons)
Senior Applications Engineer
HiL Group and RCA

E:  james.bracken@cosworth.com
T:  +44 (0) 1954 253749
M: +44 (0) 7775 028513

Quote 0 0
ce_dois
hello my friend

i got it to work, the ecu is still using desproW, i got it connect and a copy of the ecu maps, but im missing the profile (pectel sq6 v2-21 naturally aspirated)

anyone have this profile?

urgent

regards
Quote 0 0
JBracken
Hi ce_dois,

Glad you managed to get connected. Please find attached the requested profile for SQ6 V02-27(2) NA. Please let me know if you have any issues.

Thanks and kind regards,

James
James Bracken BEng (Hons)
Senior Applications Engineer
HiL Group and RCA

E:  james.bracken@cosworth.com
T:  +44 (0) 1954 253749
M: +44 (0) 7775 028513

Quote 0 0
gtihk
Interesting engine to map. Are you running the standard dash?
Quote 0 0
victorien72
hello my friend
i got it to work, the ecu is still using desproW, i got it connect and a copy of the ecu maps, but im missing the profile (pectel sq6 v2-32 naturally aspirated)
anyone have this profile?
urgent
Quote 0 0
Rob_Jarvis
Hi Victorien72,

There are a couple of different ones for this version but I believe the one in the link I have provided should be ok. If not then let me know.

https://www.dropbox.com/sh/yhzp3m9e67kjmyi/AAAkME0THZFqQvndN1S-N1JSa?dl=0 

Many thanks,

Rob

Cosworth Support
Cosworth Electronics 

Quote 0 0