Jose Costa
Hi I have one old PI dashboard (System 4) PN nº 032-002
/SNº295 and i need pin out of this display .
I i'm rebuild one old touring car and i want keep in original estate but this dash don't work ,i need the pin out for checking 
It is possible ?

Regards 
Jose 
Quote 0 0
CosworthSupport
Hi Jose,

Are you able to upload a photo of the display? I don't recognise that as a part number. However I think it is the display in the attached pdf document you are referring to.
Cosworth Support
Cosworth Electronics
Quote 0 0
Jose Costa
Hi 
The display is similar just buttons are diferent I think 

Attached dysplay pictures
Quote 0 0
CosworthSupport
Hi Jose,

Please also find attached the hardware manual for the Sys4 that you have.

This contains the pin out for the logger box in your photos.

Cosworth Support
Cosworth Electronics
Quote 0 0
Tom R
Hi Jose,

This older display only works with a logger from Pi System 4, 4+, 3+ or 5 Star.  Which logger box do you have?  The dash is useless on its own and must be connected to one of these loggers.  Your dash also has the backlighting box on the rear.  I can help with getting this system running.  I worked at Pi for many years in the US and know these older systems very well. thanks.
Tom
Quote 0 0
Xpackboy
Hi I have 2 logger 4 or 4+ and 2 dash’s the dashes work but the one logger has lost the software when I had the battery changed , wonder if anyone has the software for the logger to getting back working thanks Chris 
Quote 0 0
Tom R
Hi Chris , I can supply software for the 4+ loggers. I don’t have it for the system 4. If the p/n ends in 101 then you have a 4+. If it ends in 100 then you have a system 4. I can also replace batteries, test the loggers and provide tech support too. My email is Tom.remedios@ Gmail.com and my cell is 425-409-8454. I’m in the Seattle area. Thanks
Tom
Quote 0 0
Xpackboy
Thanks Tom for the reply , will check witch one I have , and will get back to you , via email 
Quote 0 0
rdmahurin
The System 4 software ran under MS-DOS & would have been distributed on 3.5" disks. The jump from 4 to 4+ was huge.
Quote 0 0
Xpackboy
Just looked they both end in 01 , how do you put the software in the logger ?when I changed the battery could figure it out 
Quote 1 0
rdmahurin
IIRC,  you will need a PiDD (Pi Download Dongle) to send setups or download data. Everything sorta revolved around these until they move to the Pi Sigma-era IP based comms.436191.jpg 
Quote 0 0
Xpackboy
Lol I have 3 of these sitting here , if anyone needs one 
Quote 1 0
kako911
X
Xpackboy wrote:
Lol I have 3 of these sitting here , if anyone needs one 


How much for 2 units ?

KPA
Quote 0 0
Xpackboy
Will sell you 2 pidds as soon as Tom sends them back from the USA as he was testing them for me 
Quote 0 0
Xpackboy
Got the pidds back off Tom today , these will be for sale if your still interested 
Quote 0 0