t2racing
 Hi,
I’ve changed to a new laptop. Did install the software, but somehow the new laptop can't connect to the ECU in Offload Tool. The old one does. I can't find any differences between the two laptops.
What is weird as well is, that CalTool does work perfectly on the new laptop, just not Offload Tool.
Any ideas?

Thanks
Noah Wasescha
Quote 0 0
littleozfella

You will need to allow the EOT through the firewall. Firewalls always block EOT. Either switch off the firewall or allow the program through.

Cheers
Quote 0 0
t2racing
Thanks for the answer. This is the first thing i did try. Turned the Firewall off completely. It needs to be something with the Ethernet controller on the new laptop. Funny, the LifeRacing ECU's from the Radical Sportscars I work with, do not work as well.
I tried as well to reinstall the Ethernet controller with new drivers. Didn't help.

Any new ideas?
Quote 0 0
littleozfella
Disable TCP/Ipv6 (uncheck the box)   but if you use motec you must remember to re-enable it.
Quote 0 0
t2racing
Thanks for the tip. The TCP/Ipv6 didn't make any difference. Finally i got it working, finding a different driver for the Ethernet controller.
Quote 0 0