Racer123
Hi all,

I am looking to create status channels that i can use with bit indicators in toolbox. Examples of what i would like to achieve would be to have an alarm status channel to display as a bit indicator with a bit to show if each alarm is active, or a switch status channel to show which switches are latched on/off. How do i configure these channels? 

Thanks
Quote 0 0
Burmeister
HI Racer123,

which products are you working with? Ecu or Logger/Display? Where is the channel created? Math channel in Toolbox or a onboard Math channel/Alarm?

Bit Indicators can be found in Toolbox under Insert/Display/Bit Indicator

BR
Martin

Martin Burmeister
Senior Applications Engineer - Pectel

Tel: +44 1954 253703  |   Mobile: +44 7815 008541   |  Email: martin.burmeister@cosworth.com
Cosworth Group Holdings Ltd, Brookfield Technology Centre, Twentypence Road, Cottenham, Cambridge, CB24 8PS, England

Quote 0 0
Racer123
Hi Martin,

Thanks for your reply.

We are running the new LMP2 kit, so many of the channels originate in the CalTool Config, but we also have a Toolset config to set up the logging etc. 

I have no issues with creating the bit indicator displays in toolbox. 

I am looking to create status channels in toolset.

eg, i want to create engine status where;
-bit 1 = low temp when ect<50, and = high temp when ect>105. 
-bit 2 = low oil pressure when EOP<2 
-etc 
-etc

Can a channel of this type be created as a maths channel within toolset? or do i need to create a second CAN decode from the ECU side of the logger/ECU?
Quote 0 0
Burmeister
What you can do creating a single math channel and adding Alarms as shown below and then populate this channel in the Bit-Indicator Display.

(1 * [historic_Alarm_ACT_high]) +
(2 * [historic_Alarm_CCP_high]) +
(4 * [Historic_Alarm_ECT_High])

This channel can either be created in Toolset as a onboard math channel or in toolbox.

Hope that helps
Martin

Martin Burmeister
Senior Applications Engineer - Pectel

Tel: +44 1954 253703  |   Mobile: +44 7815 008541   |  Email: martin.burmeister@cosworth.com
Cosworth Group Holdings Ltd, Brookfield Technology Centre, Twentypence Road, Cottenham, Cambridge, CB24 8PS, England

Quote 0 0