hoytf
Is is possible to set the duty cycle of an IPS32's output via CAN bus messages?  For example, is it possible to send a first CAN bus message to the IPS32 that sets the duty cycle of an output channel to 10% and then send a second CAN bus message that set the duty cycle of that output channel to 20%?  I would like to use the IPS32 to dim some interior lights via PWM.

Thank you.

Hoyt
Quote 0 0
rvmorrow
Hi hoytf

After decoding the channel in the IPS you should be able you reference it as the duty of the PWM output.

pwm.PNG 

Any proportion channel can be used to control the duty of the PWM output.

Rob

Rob

Cosworth Support
Cosworth Electronics 

 

Quote 0 0