• SQ6(M) Firmware Code Customer Release Notes

    Started by Rob_Jarvis: Please find attached the latest copy of the Customer Release Notes for the SQ6, SQ6M and SQ7Di ECU code version V11-16(1). Please contact your...

    1 0 496
  • MAF for load axis

    Started by Alex: Hi all, Is there a meta file that uses MAF as load. From what I can tell there is alpha-n and MAP based tables depending on file version. But I have...

    1 0 35
  • SQ6 Metafile - Unable to Connect Laptop

    Started by ES Motorsport: Hi Cosworth, We have a Lotus GT4 car in the race workshop running an SQ6 ECU but I am unable to connect a new laptop to the ECU. I believe this...

    3 0 55
  • Dataloging

    Started by TME: Must overlook it completely, but can not find the datalog function in PiCaltool for SQ6.. where to look for this? Communication works fine so far...

    3 0 52
  • SQ6 NA metafile v10.46.0.2

    Started by TME: Looking for metafile SQ6 NA v10.46.0.2

    1 0 38
  • Need metafile for SQ6 rev. 10.78.2 Sn:2167 for CalTool

    Started by Egmark: Hi metafile for SQ6 N/A rev. 10.78.2 Sn:2167 I have a customer car that I can´t connect to, I need the metafile can you Help me with that? I...

    1 0 37
  • Metafile for SQ6 Turbo sw version 10.78.2 ?

    Started by PQatPIT: Would be very nice to have a metafile for SQ6 Turbo, software version 10.78.2. Ecu serial is 1766, device version 4.1 / build 751, manufacturer Pi...

    3 0 48
  • DescPro Profile - SQ6v2-53:Naturally Aspirated

    Started by tpsretard: Good day. I am trying to get the profile for the ECU listed above. I "think" i converted it correctly, BDACCBAC.AAB The other option is...

    4 0 44
  • Metafile for SQ6 NA 10.73.2?

    Started by ZacMan: G'day. Have just had a couple of racecars turn up at work with SQ6 ECU's fitted. I don't have the metafile for the firmware version they're using, NA...

    3 0 139
  • EQ9 latest firmware

    Started by seanmc: Hello , i have v10-56 firmware installed currently on my EQ9 ecu , this is from 2012, is there a more current version which I can install ? Thanks...

    4 0 93
  • Need metafile for SQ6 v2-41(1) for CalTool

    Started by ljt: Hi, I want to use CalTool with my SQ6, and what I can read from others, I would need a metafile. Where can I get that? Is there a newer firmware...

    2 0 105
  • SQ6M Firmware

    Started by daniel_P: Hi, I have two SQ6M ECU's with different code versions that I would like to set to version 3.37.1. Can I please have the code loader application...

    2 0 109
  • Metafile for SQ6M

    Started by smitab: Hi ! A customer with a newly purchased rallycross car did not get any software with the car so I have no metafile to use with Pi CalTool. The...

    2 0 111
  • Pectel SQ6 in Juno SSE / Honda K20

    Started by cph: Hi I have recently purchased a Juno SSE race car that runs a Honda K20 engine and the Pectel SQ6. I have heard that the SQ6 can be upgraded to the...

    7 0 128
  • GPS data to SQ6M?

    Started by jonteman: Is it possible to feed SQ6M with GPS/Glonass data thru CAN? I have a all the GPS data available in the AIM MXG dash with possibility to define CAN...

    0 0 42
  • SQ6 datalog missing

    Started by E6X: Hi, I am novice Pectel user. Previously I have looked logged data several times from ECU, but suddenly there is no logged data anymore. Also the ECU...

    5 0 88
  • SQ6v2-21 update to Caltool

    Started by slowie: Hi I recently started looking after a racecar with SQ6, v2-21 NA using DescProW. I would like to update to using CalTool instead. Is a metafile...

    2 0 99
  • SQ6M settings for OEM Speed sensor

    Started by Robbied: Hi, My SQ6M has been running on my Subaru race car for sometime now. i have an OEM 6 Speed transmission with the OEM vehicle speed sensor, as yet...

    2 0 99
  • SQ6M CAN message

    Started by wmax99: Hello, i want to use an SQ6M with a small display. I am looking to set up the message by CAN but I can't find any information. Would it be...

    1 0 210
  • SQ6 Firmware update?

    Started by ZacMan: Do you publicly release firmware updates for the SQ6 range of ECU's? Or is it something you deal with on a per-customer basis? We used the SQ6 and...

    1 0 172
  • Transmission Control strategies help

    Started by jchong: Hello, I am trying to use the closed_loop / fully manual shift control modes in my sq6. I have a honda k20 with a sadev sl75 . My system works if I...

    20 0 240
  • sq6 N/A version 2.21.0.1488

    Started by emcracing: I have a Norma M20F (2007) running the honda/montune. When we purchased it 4 years ago, we had to send ECU to montune then cosworth to unlock...

    1 0 101
  • Change control algorithm and

    Started by Hans: Hi, Is it possible to change the control algorithm for the fuel and ignition map ? I prefer to use the RPM related to the load (so I can use...

    0 0 106
  • Lambda Bosch LSU 4.2 wiring

    Started by Hans: Hi, Is it possible to wire a wideband lambda sensor directly to a SQ6 module without a controller ? If so, can someone tel me wich pins I have to...

    3 0 267
  • Re-Flash ECU to use external personality

    Started by jchong: I have a sq6 that is in my Norma m20f. The car was run in the vdev series and has a honda k20 with sadev sl75 trans. The ecu was tuned by montune and...

    30 1 431

Add a Website Forum to your website.